Eliminate Green Pool Emergencies on Hilton Head Island
C6 Property Services Group takes pool service to the next level for Vacation Home Property Management Companies on Hilton Head Island
The Hilton Head climate in the peak of the summer season is hot and humid and if your pool service provider is not servicing your pool twice a week, you're at risk for a "GREEN POOL EMERGENCY" - If your home is listed with one of the Islands Vacation Home Rental Management Companies, this can cause serious issues if your pool turns green during a vacationers stay at your home. A clean pool with crystal-clear water is expected by vacation home renters — If you're experiencing a "Green Pool Emergency" - Send us a work order
C6 Property Services Group -
We recommend twice a week service through the months of June, July, August & September - The rest of the year once per week service with regularly scheduled shock treatments to eliminate the need for "Emergency Green Pool" Services
Why is you're pool green and how we can eliminate this from happening again?
Why your pool turns green
Lack of Maintenance: Cleaning & Chemistry
Not having routine scheduled services, qualified pool service technicians, attention to service details and a lack of communication with the management company and home owner on Hilton Head is a recipe for disaster for any pool. It is the responsibility of the pool services provider to let management/Home owner know what is needed and if changes to the service are required because of weather conditions etc.
Heavy Rains
Hilton Head has an Average rainfall in August of 5.1 Inches. This rainfall plus hot/humid weather is a cause for concern for pools. Rainfall changes your pools chemical balance making your pool susceptible to bacteria and algae growth.
Heat Waves
Pool water in August on Hilton Head becomes very warm which increases the likelihood of algae growth in pools. If you’re going through a heat wave, be sure to keep a close watch on your pool and stay on track with your cleaning schedule.
Water Circulation Problems
Circulation is key to keeping your pool clean. Stagnant water creates an opportunity for algae, bacteria, and other contaminants to take over and turn your pool green. Keep your pool pump clean, in good condition, and running consistently to keep water flowing.
Non-Algae Cause: Copper Ions
Another reason your pool could be green is if your water has high levels of copper. The chemical balance of your pool can easily be thrown off, causing problems across the board. Regular testing and balancing can help avoid these problems.
Steps for Cleaning a Green Pool
If you are dealing with green algae, it is important to take care of it quickly before the problem becomes worse. Follow these step-by-step instructions from the professionals at C6 Property Services Group of Hilton Head. If you need assistance with a Green Pool Emergency - send us a work order
Brush & Vacuum
Begin by scrubbing every inch of the pool. Make sure you reach the stairs, the walls, and the hard-to-reach corners. This will loosen up any algae that have accumulated on these surfaces, making it easier to remove.
After you’ve brushed and brushed, it’s time to vacuum. Be thorough and make several passes if necessary.
Test Alkalinity & pH
Next, you need to test the alkalinity and pH of your water. Alkalinity measures the water’s ability to resist a change in pH levels. Your pH levels, on the other hand, measure how acidic the water is. When correctly balanced, these chemicals work around the clock to keep your pool clean and safe for swimming.
Test your levels and adjust as needed. Remember, your pH levels should fall between 7.2-7.8, while your alkalinity should be at 80-120 PPM.
Double or Triple Shock the Pool
Shocking should be a regular part of your pool’s maintenance schedule. This process involves adding chemicals to the water in order to keep it balanced and raise the free chlorine levels.
When working against a green algae problem, a double or triple dose is necessary. The increase in chemicals will kill algae and bacteria. Follow the instructions on the package carefully, and be sure to wear protective equipment like goggles and gloves when handling the chemicals.
Run the Pool Filter
After a double or triple dosage of shock, don’t forget to turn on your pool’s filter. This will collect and remove dead algae and other contaminants, leaving you with cleaner and clearer water.
Repeat Until Clear
If, after all these steps, your water continues to look green or cloudy, repeat the process from start to finish. Continue doing so until the water is clear and you see no lingering traces of algae.